TRAILER DIMENSION
The deck is Custom built to meet your requirements with a width of 2.5 metres. A 7.5m top deck,with a 1.5 m beavertail. The trailer height with 20 axle is from 1050mm.
TRAILER CONSTRUCTION
The main chassis frame has a depth of 400mm (310UB). Cross members are made of 100 x 50 x 4mm RHS and the combing rail is constructed of 125 x 65 channel.
Tie down points are positioned in the floor along each side of the trailer to allow tensioning of loads with chains. A 65mm roll bar is fitted at the front of the trailer. A rope rail is fitted to the trailer underneath of the combing rail.
TRAILER RAMPS
Construction of rear ramps are 2.500 x 750m wide, 150 x 50 x 4mm RHS, with 5mm checker plate and grip bars. Expanded mesh can also be fitted if required.
The hinge pins are made of 40mm high tensile steel with greasable bushes to save on excess wear and tear. Hydraulics are fitted as standard, which has a self sufficient power pack located in the well, at the rear of the trailer. The truck (12 or 24 volt) charges the power pack. The rams are heavy duty, 18" x 2 ½ " in size, mounted on the rear of the ramps. Front ramps are also avaible as an extra, to support front loading trailers.
Bi Fold ramps and front ramps are also available as an option.
TRAILER FLOOR
The floor is constructed of 5 mm checker plate.
TRAILER COUPLING
A choice of the Bartlett 59 AX or the DB1385 Pintle eye. 50mm Ringfeder.
AXLES
20 axles with 10 on 285 PCD are fitted as standard.
17.5 & 19.5 can also be supplied when required.

TRAILER BRAKES
EBS Braking Systems are fitted. The trailer shall be to ADR 38-03 standard with 7" linings, full air using an A.B.C. brake system, with 24 / 30 boosters.
TRAILER SUSPENSION
Suspension is a FUWA KHITCH under slung style with 9 leaf springs.
Airbag suspension is also an option that can be fitted.
TAG TRAILER TYRES AND RIMS
255R / 70 22.5 are fitted as standard. 235/70 17.5 & 265/70 19.5 are also available. The trailer is fitted with a spare wheel and tyre as standard. The spare wheel carrier is mounted between the chassis rails for easy access for (1) one only person to remove and replace spare wheel. Clamped up by a winch mechanism for simple use.
FRONT LEG
A quality K Hitch Two Speed Wind down Leg fitted as standard.
Available as an extra is a NorthStar Hydrulic front leg for easy use.
TRAILER LIGHTS
Hella LED lights are fitted as standard and mounted as per ADR 62 / 00 requirements with a round 7 pin trailer plug.
TOOLBOX/WATERTANK
The trailer is fitted with an under mounted low profile tool box as standard as well as one in the beavertail.
60lt aluminum water tank comes fitted as standard.
Extra toolboxes or custom made toolboxes can be supplied if required.
MUD FLAPS AND MUDGUARDS
Mudguards are mounted at the front and rear of the wheels with steel stays.
Mud flaps are attached to the rear guards.
TRAILER FINISHING
Our finishing process eliminates all burrs and sharp edges, as well as sandblasting and coating with two pack paint in your fleet colours.
Other Extras Available
Deck widening models
Gates, Gate Pockets
Fuel and or Water Tanks
Hydraulic Front Leg
Flush Combing
Alloy Wheels
BPW Axles
Air Bag suspension
Container pins
Reversing lights and Cameras
Bi fold Ramps
Every trailer comes with 12 months Full Warranty.
North Star Transport Equipment is a company prepared to go the extra mile and has a high reputation of service and quality.